Danfoss 131X3595 FC 302 1.1 kW PROFINET Drive
Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Danfoss 131X3595 is a VLT AutomationDrive FC 302 frequency inverter, model FC-302P1K1T5E20H1XGXXXXSXXXXALBXCXXXXD0, for three-phase AC motor control in industrial automation systems. It has a rated power of 1.1 kW or 1.5 HP and accepts a 380-500 V AC supply. The IP20, A2-frame drive includes a Class A1/B (C1) EMC filter and supports Integrated Motion Controller functionality for positioning and synchronization operations.
This configured FC 302 includes an MCA 120 PROFINET option card with an RJ45 connector and an MCB 107 option card for an external 24 V DC backup supply. A replacement must therefore match the Danfoss FC 302 platform, the communication and backup-power option configuration, and the machine's parameters. Four parameter sets can be stored in non-volatile EEPROM memory and transferred through the Graphical Local Control Panel, while Danfoss MCT 10 Set-up Software supports commissioning, configuration, diagnostics and parameter management. ABC Industrial Parts can support preparation of a spare where parameter transfer or replacement configuration is required.
For troubleshooting, the Graphical LCP provides real-time parameter readouts, local monitoring and diagnostic access. Its status indication uses green for On, yellow for Warning, and red or flashing red for Alarm. PROFINET diagnostic words provide an additional view of drive status through the automation network, and MCT 10 can be used alongside the Graphical LCP during commissioning and fault investigation. Before exchanging the inverter, check the supply arrangement, PROFINET connection, option cards and transferred parameter set.
Technical Specifications
| Manufacturer | Danfoss |
| Part number | 131X3595 |
| Model/type | FC-302P1K1T5E20H1XGXXXXSXXXXALBXCXXXXD0 |
| Component type | Frequency inverter |
| Product family | VLT AutomationDrive FC 300 |
| Series | VLT AutomationDrive FC 302 |
| Rated power | 1.1 kW |
| Rated power | 1.5 HP |
| Supply voltage range | 380-500 V AC |
| Number of phases | 3 |
| 24 V DC backup supply | Supported via MCB 107 option card |
| Protection rating | IP20 |
| Frame size | A2 |
| EMC filter class | Class A1/B (C1) |
| Communication protocol | PROFINET IO via MCA 120 option card |
| PROFINET connector | RJ45 |
| Integrated Motion Controller | Supported for positioning and synchronization operations |
| Cooling concept | Back-channel cooling with advanced thermal design |
| Parameter set storage | 4 parameter sets in non-volatile EEPROM memory |
| Parameter backup and transfer | Supported through Graphical LCP |
Programming and Configuration
The Graphical Local Control Panel supports local parameterization, monitoring, diagnostics and parameter backup. Four parameter sets can be stored in non-volatile EEPROM memory, and settings can be copied between compatible drives using the LCP.
Danfoss MCT 10 Set-up Software supports drive configuration, commissioning, diagnostics and parameter management. When commissioning a replacement, transfer the required parameter set and confirm that the drive configuration matches the installed MCA 120 PROFINET and MCB 107 option cards.
Communication and System Integration
The Danfoss 131X3595 is configured for PROFINET IO through an MCA 120 option card. The PROFINET connection uses an RJ45 connector for integration with compatible automation controllers and distributed industrial control systems.
PROFINET diagnostic words can provide drive-status information through the fieldbus. For a replacement, verify the MCA 120 option card, RJ45 network connection and transferred drive parameters before returning the inverter to the machine.
Diagnostics and Status Indication
The Graphical LCP provides real-time parameter readouts, local monitoring and diagnostic access. MCT 10 Set-up Software provides an additional tool for commissioning, diagnostics and parameter management.
The drive can also provide diagnostic information through PROFINET fieldbus diagnostic words. During troubleshooting, check the primary supply, the external 24 V DC backup-supply arrangement when used, the RJ45 PROFINET connection, the installed option cards and the active parameter set.
Status LED Indicators
| LED | Color/Status | Meaning |
|---|---|---|
| LCP Status LEDs | Green, Yellow, Red - On, Warning, Alarm or flashing red | The Graphical LCP indicates drive status using green for On, yellow for Warning, and red or flashing red for Alarm. |
Replacement and Spare Part Considerations
Use the complete Danfoss part number 131X3595 and model/type FC-302P1K1T5E20H1XGXXXXSXXXXALBXCXXXXD0 when identifying a spare. Compatibility checks should include the VLT AutomationDrive FC 302 platform, 1.1 kW rating, 380-500 V AC three-phase supply, IP20 A2 frame, MCA 120 PROFINET option card and MCB 107 external 24 V DC backup option.
A replacement drive requires commissioning rather than simple mechanical substitution. Transfer the required parameters through the Graphical LCP or configure the unit with MCT 10 Set-up Software, then check the RJ45 PROFINET connection, option-card configuration and machine-side settings before operation. ABC Industrial Parts can assist with preparing a compatible spare or evaluating a repair or exchange route.
Frequently Asked Questions
What is the Danfoss 131X3595?
It is a Danfoss VLT AutomationDrive FC 302 frequency inverter, model FC-302P1K1T5E20H1XGXXXXSXXXXALBXCXXXXD0, rated at 1.1 kW or 1.5 HP for a three-phase 380-500 V AC supply.
Does the Danfoss 131X3595 support PROFINET?
Yes. This configuration uses an MCA 120 PROFINET option card with an RJ45 connector for PROFINET IO communication.
Which backup supply option is fitted to this FC 302 drive?
The configured drive supports an external 24 V DC backup supply through an MCB 107 option card.
How can parameters be transferred to a replacement drive?
Parameter sets can be stored in non-volatile EEPROM memory and copied between compatible drives through the Graphical Local Control Panel. Danfoss MCT 10 Set-up Software also supports configuration and parameter management.
How does the Graphical LCP indicate drive status?
The Graphical LCP uses green for On, yellow for Warning, and red or flashing red for Alarm. It also provides real-time parameter readouts and diagnostic access.
What should be checked before commissioning a replacement?
Check the complete part number and model/type, the 1.1 kW rating, 380-500 V AC three-phase supply, A2 frame, MCA 120 and MCB 107 option cards, parameter transfer, and RJ45 PROFINET connection.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Danfoss.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.