Siemens 6SL3210-1KE18-8AF1 SINAMICS G120C Frequency Inverter

New 
6 available within 2 - 3 business days
Refurbished   
1 available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: SINAMICS

The Siemens 6SL3210-1KE18-8AF1 is a SINAMICS G120C frequency inverter for controlling three-phase motors in industrial automation and machine-building equipment. It provides a 4 kW low-overload rating and a 3 kW high-overload rating from a 380–480 V AC, three-phase supply. The drive combines an integrated Class A EMC filter, braking chopper, and Safe Torque Off function with flexible motor control through linear V/f, square V/f, V/f ECO, and Sensorless Vector Control.

Replacement commissioning requires more than fitting the inverter in the control panel. The drive can be engineered with SINAMICS Startdrive in TIA Portal or with the standalone STARTER software, while BOP-2 and IOP-2 operator panels provide local operation, parameterization, and diagnostics. An optional SINAMICS SD memory card supports parameter backup, firmware updates, and transfer to a replacement drive. For a PROFINET installation, the replacement must receive the correct PROFINET device name and the drive configuration and parameters must match the machine.

The G120C provides front-cover LED indications, diagnostic registers through PROFINET PN-IO, and fault memory buffer parameters r0945 and r0947. Online diagnostics are available through SINAMICS Startdrive or STARTER, and BOP-2 or IOP-2 panels can show fault and alarm history. During troubleshooting, check the RDY and BF indications, the PROFINET device name and configuration, and whether the SAFE indication corresponds to an active Safe Torque Off function before returning a replacement drive to service.

Technical Specifications

ManufacturerSiemens
Part number6SL3210-1KE18-8AF1
Model/typeSINAMICS G120C
Product familySINAMICS
Component typeFrequency inverter
Rated power, low overload4 kW
Rated power, high overload3 kW
Supply voltage380–480 V AC, 3-phase
Supply frequency47–63 Hz
Rated output current, low overload8.8 A
Maximum peak output current14.6 A
Default switching frequency4 kHz
Maximum output frequency, V/f control550 Hz
Maximum output frequency, Sensorless Vector Control240 Hz
EMC filterIntegrated Class A
Braking chopperIntegrated
Communication interfaceDual-port PROFINET / Industrial Ethernet
Network connectorRJ45
Communication speed100 Mbit/s
Supported communication protocolPROFINET IO, PROFIsafe capable
Control methodsV/f linear, V/f square, V/f ECO, Sensorless Vector Control
Safety functionSafe Torque Off integrated as standard

Programming and Configuration

Commissioning is supported through SINAMICS Startdrive in TIA Portal or the standalone STARTER software. BOP-2 and IOP-2 operator panels can also be used for local operation, parameterization, and diagnostics.

An optional SINAMICS SD memory card supports parameter backup, firmware updates, and parameter transfer to a replacement drive. A spare should therefore be prepared with the machine-specific parameters and the correct PROFINET device name before it is placed into service.

Communication and System Integration

The inverter has dual-port PROFINET / Industrial Ethernet communication with RJ45 connectivity and a communication speed of 100 Mbit/s. PROFINET IO supports real-time drive control, parameter access, commissioning, and diagnostics within an industrial Ethernet network.

The communication interface is PROFIsafe capable. When integrating a replacement, the PROFINET device name and drive configuration must correspond to the machine system so that the inverter can communicate correctly with the control system.

Diagnostics and Status Indication

The front-cover LEDs provide local status information. RDY indicates drive readiness, a fault condition, or startup and commissioning activity; BF indicates a PROFINET bus error or configuration mismatch; and SAFE indicates that the Safe Torque Off function is active.

Further diagnostics are available through PROFINET PN-IO diagnostic registers, fault memory buffer parameters r0945 and r0947, and online tools in SINAMICS Startdrive or STARTER. BOP-2 and IOP-2 panels provide access to fault and alarm history.

Status LED Indicators

LEDColor/StatusMeaning
RDYGreen or red - Green: solid; red: solid; flashing during startup or commissioningIndicates drive readiness, a fault condition, or startup and commissioning activity
BFRed - Solid or flashingIndicates a PROFINET bus error or configuration mismatch
SAFEIndicates that the Safe Torque Off function is active

Replacement and Spare Part Considerations

Verify the complete part number 6SL3210-1KE18-8AF1, the SINAMICS G120C model, the 4 kW low-overload or 3 kW high-overload rating, and the 380–480 V AC, three-phase supply before selecting a spare. The replacement should also match the dual-port PROFINET interface, integrated Class A EMC filter, braking chopper, and Safe Torque Off requirements of the installation.

A replacement drive requires configuration work before operation. Transfer the machine parameters using an optional SINAMICS SD memory card or commissioning software, assign the correct PROFINET device name, and check communication and Safe Torque Off functions during commissioning. Startdrive, STARTER, BOP-2, and IOP-2 can support this preparation and verification.

Frequently Asked Questions

What is the Siemens 6SL3210-1KE18-8AF1?

It is a Siemens SINAMICS G120C frequency inverter with a 4 kW low-overload rating, a 3 kW high-overload rating, and a 380–480 V AC, three-phase supply.

Which communication interface does this SINAMICS G120C use?

The inverter uses dual-port PROFINET / Industrial Ethernet communication through RJ45 connectors at 100 Mbit/s. It supports PROFINET IO and is PROFIsafe capable.

Which software can be used to commission the drive?

The drive can be commissioned with SINAMICS Startdrive in TIA Portal or with the standalone STARTER software. BOP-2 and IOP-2 operator panels also support local parameterization and diagnostics.

How can parameters be transferred to a replacement drive?

An optional SINAMICS SD memory card can be used for parameter backup and transfer. The replacement must also receive the correct PROFINET device name and be checked against the machine configuration.

What do the RDY, BF, and SAFE LEDs indicate?

RDY indicates readiness, a fault, or startup and commissioning activity. BF indicates a PROFINET bus error or configuration mismatch. SAFE indicates that Safe Torque Off is active.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.