Siemens 6SN1123-1AA00-0DA1 SIMODRIVE 611 Power Module

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6SN1123-1AA00-0DA1 is a single-axis SIMODRIVE 611 power module, also identified as an LT Module, for modular CNC and industrial motion-control systems. Its 80 A IGBT power stage controls AC, DC, servo, spindle and induction motor applications. The module operates from a 600 V DC link supplied by a central SIMODRIVE 611 infeed module and is designed for cabinet-integrated installation with internal cooling and the required airflow clearance.
A compatible plug-in control unit is required to operate the 6SN1123-1AA00-0DA1. Supported options include SIMODRIVE 611-D, SIMODRIVE 611 Universal and SIMODRIVE 611-A control units, connected through the internal SIMODRIVE bus and plug-in interface. When commissioning a replacement, the existing compatible control unit and the connected CNC controller configuration must match the installed drive architecture. The module connects to the DC link through terminals supplied by the SIMODRIVE 611 infeed module rather than operating as a standalone drive.
For troubleshooting, SIMODRIVE 611 fault codes can identify an inactive or missing axis drive, measuring-circuit problems, unsupported hardware versions, drive power failure, bus communication failure, access timeout or CRC errors. Fault code 300200 identifies a drive bus hardware fault; check control card mounting and replace the drive unit if an internal hardware failure is confirmed. The module is discontinued and remains relevant as a replacement for existing SIMODRIVE 611 CNC servo and spindle systems where the control-unit interface, DC link supply and motor requirements match.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6SN1123-1AA00-0DA1 |
| Model/type | LT Module |
| Component type | Servo drive power module |
| Product family | SIMODRIVE 611 |
| Number of axes | 1 axis |
| Rated current | 80 A |
| DC link voltage | 600 V DC |
| Power stage | IGBT output stage |
| Rated motor current for 1FT5 motors | 40 A |
| Rated motor current for 1FT6 motors | 28 A |
| Rated motor current for 1PH motors | 30 A |
| Rated motor current for induction motors | 30 A |
| Cooling method | Internal cooling |
| Control unit interface | Internal SIMODRIVE bus and plug-in interface for 611-D, 611 Universal, or 611-A control units |
| DC link power connection | DC link terminals from SIMODRIVE 611 infeed module |
| Lifecycle status | Discontinued |
Communication and System Integration
The 6SN1123-1AA00-0DA1 integrates into a modular SIMODRIVE 611 cabinet through the internal SIMODRIVE bus and its plug-in interface for a compatible 611-D, 611 Universal or 611-A control unit. The control unit provides the drive-control functionality, while the LT Module supplies the IGBT power switching stage.
Power is supplied through DC link terminals from a central SIMODRIVE 611 infeed module at 600 V DC. Compatibility checks should include the installed SIMODRIVE 611 control-unit type, infeed module and single-axis motor application before a replacement is commissioned.
Replacement and Spare Part Considerations
For a replacement, match the complete part number 6SN1123-1AA00-0DA1 and confirm the existing SIMODRIVE 611 architecture. The 600 V DC link supply, compatible 611-D, 611 Universal or 611-A plug-in control unit, single-axis configuration and motor application must correspond to the installed system. Motor current requirements are 40 A for 1FT5 motors, 28 A for 1FT6 motors, and 30 A for both 1PH and induction motors.
A spare is not a standalone drive: it requires the compatible control unit and connection to a SIMODRIVE 611 infeed module. Before returning the machine to service, check control card mounting, DC link connections, internal SIMODRIVE bus integration and cabinet airflow clearance. Because SIMODRIVE 611 is discontinued, a tested replacement or repair exchange can be relevant when retaining the existing CNC drive architecture is more practical than a platform change.
Error Codes & Fault Codes
The following error codes may be displayed during operation or diagnostics:
| Code | Name | Description | Possible Cause | Recommended Action |
|---|---|---|---|---|
| 300007 | Axis drive not present or inactive | Axis %1 drive %2 not present or inactive | - | - |
| 300008 | Measuring circuit not available | Axis %1 drive %2 measuring circuit %3 is not available | - | - |
| 300009 | Wrong measuring circuit type | Axis %1 drive %2 measuring circuit %3 has the wrong measuring circuit type; type %4 is used | - | - |
| 300010 | Active without NC axis assignment | Axis %1 drive %2 is active without NC axis assignment | - | - |
| 300011 | Spindle hardware version unsupported | Axis %1 drive %2 hardware version of the spindle is not supported | - | - |
| 300012 | Control module hardware version unsupported | Axis %1 drive %2 hardware version of the control module is not supported | - | - |
| 300020 | Drive removed for diagnostics | Drive %1 was removed for diagnostics | - | - |
| 300100 | Drive power failure | Drive power failure | - | - |
| 300101 | Bus communications failure | Drive bus communications failure | - | - |
| 300200 | Drive bus hardware fault | Drive bus hardware fault | - | Check control card mounting or replace the drive unit if an internal hardware failure is confirmed. |
| 300201 | Access timeout | Axis %1 drive %2 experienced a timeout during access at error location %3 | - | - |
| 300202 | CRC error | Axis %1 drive %2 reported a CRC error at error location %3 | - | - |
Frequently Asked Questions
What is the Siemens 6SN1123-1AA00-0DA1?
It is a single-axis SIMODRIVE 611 servo drive power module, also identified as an LT Module, with an 80 A IGBT power stage.
What supply does this SIMODRIVE 611 power module require?
The module operates from a 600 V DC link supplied through DC link terminals by a central SIMODRIVE 611 infeed module.
Which control units are compatible with the 6SN1123-1AA00-0DA1?
The module accepts plug-in SIMODRIVE 611-D, SIMODRIVE 611 Universal or SIMODRIVE 611-A control units through the internal SIMODRIVE bus and plug-in interface.
Which motor applications are supported?
The module supports AC, DC, servo, spindle and induction motor applications. The application-specific motor current ratings are 40 A for 1FT5, 28 A for 1FT6, and 30 A for both 1PH and induction motors.
What should be checked when replacing this drive module?
Check the complete part number, SIMODRIVE 611 infeed module, 600 V DC link, compatible control-unit type, motor current requirement, single-axis configuration, control card mounting, bus connections and cabinet airflow clearance.
What does fault code 300200 mean?
Fault code 300200 indicates a drive bus hardware fault. Check control card mounting and replace the drive unit if an internal hardware failure is confirmed.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



