Siemens 6AV2144-8GC10-0AA0 TP700 Comfort INOX HMI Operator Panel

Het item werd toegevoegd aan uw offerteaanvraag
Product Information
The Siemens 6AV2144-8GC10-0AA0 Operator Panel TP700 Comfort Inox is a SIMATIC HMI operator panel in the Comfort Panels INOX series. It provides machine and process visualization and operator control through a 7-inch widescreen TFT touch display with 800 × 480 pixel resolution and 16 million colors. The smooth stainless-steel front has an IP66K protection rating, supporting hygienic installation in splash-prone production environments such as food and beverage processing, packaging machinery and hygienic manufacturing.
A replacement panel can be configured and transferred with WinCC Comfort V11 or higher. The unit has 12 MB of internal non-volatile configuration memory and supports project backup and restoration using supported USB storage. Integration with Siemens automation systems is provided through built-in PROFINET, MPI, PROFIBUS DP and USB interfaces. Before commissioning a spare, the HMI project, parameter sets, communication configuration and the selected transfer method should be prepared for the replacement workflow.
WinCC online diagnostics, the system diagnostics buffer, on-screen system alarm messages and integrated system diagnostics provide the main diagnostic methods for the TP700 Comfort INOX. For first-line troubleshooting, check the 24 V DC supply, the HMI project and configuration, and the PROFINET, MPI or PROFIBUS DP connection used by the machine. The panel is in phase-out status; the SIMATIC HMI MTP700 Unified Comfort INOX is listed as the recommended successor. Windows CE 6.0 is the operating system, and Microsoft security-update support has ended.
Technical Specifications
| Manufacturer | Siemens |
| Part number | 6AV2144-8GC10-0AA0 |
| Model/type | Operator Panel TP700 Comfort Inox |
| Component type | HMI operator panel |
| Product family | SIMATIC HMI |
| Series | Comfort Panels INOX |
| Display type | Widescreen TFT |
| Display size | 7 in |
| Display dimensions | 152.4 × 91.4 mm |
| Display resolution | 800 × 480 pixel |
| Display colors | 16 million colors |
| Backlight MTBF | 80000 h at 25 °C |
| Front protection rating | IP66K |
| Front material | Stainless steel with continuous decorative film |
| Rated supply voltage | 24 V DC |
| Supply voltage range | 19.2–28.8 V DC |
| Current consumption | 0.5 A |
| Inrush current I²t | 0.5 A²s |
| Configuration memory | 12 MB |
| Operating system | Windows CE 6.0 |
| Built-in interfaces | PROFINET, MPI/PROFIBUS DP, USB |
| Supported communication protocols | PROFINET, MPI, PROFIBUS DP |
| USB storage support | SIMATIC IPC USB Flashdrive up to 16 GB; SIMATIC HMI USB stick up to 8 GB |
| Engineering software | WinCC Comfort V11 or higher |
| Configuration storage | Internal non-volatile memory with USB backup and restore |
| Lifecycle status | Phase-out |
| Recommended successor | SIMATIC HMI MTP700 Unified Comfort INOX |
Programming and Configuration
The TP700 Comfort INOX is configured with WinCC Comfort V11 or higher. Project transfer is part of the replacement process, so the spare should be prepared with the HMI project and the machine-specific parameter sets before it is returned to service.
Configuration data is stored in the internal 12 MB non-volatile memory. USB backup and restore are supported with a SIMATIC IPC USB Flashdrive up to 16 GB or a SIMATIC HMI USB stick up to 8 GB, allowing an existing project configuration to be restored to a replacement panel.
Communication and System Integration
Built-in PROFINET, MPI and PROFIBUS DP interfaces allow the TP700 Comfort INOX to integrate with Siemens automation systems. The required interface and protocol should match the network connection used by the installed machine.
USB interfaces support service and storage functions, including project backup and restore. For a replacement, verify the communication configuration in the WinCC Comfort project and transfer the project using the selected USB or engineering connection method.
Diagnostics and Status Indication
The TP700 Comfort INOX provides WinCC online diagnostics, an integrated system diagnostics buffer, on-screen system alarm messages and integrated system diagnostics. These functions support fault investigation directly through the HMI and the connected Siemens automation system.
When troubleshooting a replacement or an installed panel, begin by checking the 24 V DC supply, the transferred WinCC Comfort project and configuration, and the active PROFINET, MPI or PROFIBUS DP connection. The panel has no status LED entries listed for separate LED interpretation.
Replacement and Spare Part Considerations
For an exact replacement, match Siemens part number 6AV2144-8GC10-0AA0 and the TP700 Comfort INOX model. Confirm that the spare can use WinCC Comfort V11 or higher and that the required PROFINET, MPI or PROFIBUS DP network connection corresponds with the machine installation.
A spare panel requires commissioning rather than simple mechanical substitution: transfer the WinCC Comfort project or restore the USB backup, load the relevant parameter sets and check the communication configuration. The panel is in phase-out status, with the SIMATIC HMI MTP700 Unified Comfort INOX listed as the recommended successor.
Frequently Asked Questions
Which software is required to configure the Siemens 6AV2144-8GC10-0AA0?
The TP700 Comfort INOX is configured and transferred with WinCC Comfort V11 or higher.
Which interfaces are built into the TP700 Comfort INOX?
The panel has built-in PROFINET, MPI/PROFIBUS DP and USB interfaces. Supported communication protocols are PROFINET, MPI and PROFIBUS DP.
Can the HMI project be transferred to a replacement panel?
Yes. The project can be transferred using WinCC Comfort V11 or higher, and configuration can also be backed up and restored through supported USB storage.
What USB storage is supported for backup and restore?
The panel supports a SIMATIC IPC USB Flashdrive up to 16 GB and a SIMATIC HMI USB stick up to 8 GB.
How can faults be investigated on the TP700 Comfort INOX?
Use WinCC online diagnostics, the system diagnostics buffer, on-screen system alarm messages and integrated system diagnostics. Also check the 24 V DC supply, project configuration and active network connection.
What is the recommended successor for this HMI panel?
The listed recommended successor is the SIMATIC HMI MTP700 Unified Comfort INOX.
Take advantage of our exchange formula
A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.
Play it safe with our warranty conditions
Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.
Data backup and recovery
Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.
Specific firmware and hardware versions
If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.
Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.



