Siemens 6AV2124-0GC01-0AX0 TP700 Comfort HMI Panel

New 
10+ available within 2 - 3 business days
Refurbished   
4 available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

The Siemens 6AV2124-0GC01-0AX0 is a SIMATIC HMI TP700 Comfort 7-inch touch panel for machine operator control, factory automation visualization, alarm management and process monitoring. Its 7-inch widescreen TFT touchscreen has an 800 × 480 pixel resolution and displays up to 16 million colors. The panel operates with Windows CE 6.0 and provides an IP65-protected front with IP20 protection at the rear.

For connection to Siemens automation systems, the TP700 Comfort provides two RJ45 ports through an integrated two-port PROFINET Industrial Ethernet switch. A combined RS-485/RS-422 interface with a 9-pin Sub-D connector supports MPI and PROFIBUS-DP. Two USB 2.0 Type-A ports and two SD card slots support peripherals, data transfer, project storage and backup. A replacement panel can be commissioned by restoring a project from a System SD Card or downloading the project from an engineering PC using TIA Portal and SIMATIC WinCC Comfort V11 or higher. Firmware and hardware-generation compatibility must match the installed project and system.

The 24 V DC panel has 12 MB of non-volatile configuration memory and supports diagnostic access through TIA Portal, SIMATIC WinCC Online Diagnostics, system diagnostic screens and its built-in web server via HTTPS. For troubleshooting, check the 24 V DC supply, the PROFINET connection or the MPI/PROFIBUS-DP connection used by the installation, then confirm the project, firmware and hardware generation. Siemens has announced the 6AV2124-0GC01-0AX0 for phase-out effective January 31, 2026; the SIMATIC HMI Unified Comfort Panel 6AV2128-3GB06-0AX1 is identified as a recommended successor, while physical cutout, installation dimensions and project compatibility require checking before an exchange.

Technical Specifications

ManufacturerSiemens
Part number6AV2124-0GC01-0AX0
Model/typeSIMATIC HMI TP700 Comfort 7-inch Touch Panel
Component typeHMI touch panel
Product familySIMATIC HMI Comfort Panels
Display size7 in
Display resolution800 × 480 pixels
Display colors16 million colors
Supply voltage24 V DC
Rated current0.5 A
Typical power consumption12 W
Configuration memory12 MB
Configuration storageNon-volatile flash memory with System SD Card expansion
PROFINET interface2-port Industrial Ethernet switch with RJ45 connectors
MPI/PROFIBUS-DP interfaceCombined RS-485/RS-422 interface with 9-pin Sub-D connector
USB interfaces2 × USB 2.0 Type-A ports
SD card interfaces2 × SD card slots
Supported communication protocolsPROFINET, PROFIBUS-DP, MPI, HTTP and HTTPS
Engineering softwareSIMATIC WinCC Comfort V11 or higher in TIA Portal
Operating systemWindows CE 6.0
Front enclosure protectionIP65
Rear enclosure protectionIP20

Programming and Configuration

The TP700 Comfort is configured with SIMATIC WinCC Comfort V11 or higher in TIA Portal. The engineering PC can transfer the HMI project to the panel, while the panel's 12 MB of non-volatile configuration memory retains configuration data. The panel runs Windows CE 6.0.

For a spare-unit installation, the existing project can be restored from a System SD Card or transferred from an engineering PC through TIA Portal and WinCC Comfort. Check that the project, firmware and hardware generation are compatible before commissioning the replacement.

Communication and System Integration

Two RJ45 ports form an integrated two-port PROFINET Industrial Ethernet switch for Siemens PROFINET-based automation networks. The TP700 Comfort also includes a combined RS-485/RS-422 interface with a 9-pin Sub-D connector for MPI and PROFIBUS-DP systems.

HTTP and HTTPS support enables web-based visualization and diagnostic access through the built-in web server. Two USB 2.0 Type-A ports provide peripheral and data-transfer connections, and two SD card slots support storage, project backup and restore.

Diagnostics and Status Indication

Diagnostic access is available through TIA Portal and SIMATIC WinCC Online Diagnostics, through system diagnostic screens on the panel display, and through the built-in web server using HTTPS. These methods support checks of the HMI and its integration with the automation system.

When a replacement panel does not communicate with the machine, check the 24 V DC supply, the active PROFINET or MPI/PROFIBUS-DP connection, the transferred project and the compatibility of the firmware and hardware generation.

Replacement and Spare Part Considerations

Verify the exact part number 6AV2124-0GC01-0AX0, the TP700 Comfort model, the communication interface used by the machine and the project's Siemens WinCC Comfort and TIA Portal requirements. A replacement is commissioned by restoring the project from a System SD Card or downloading it from an engineering PC; firmware and hardware-generation compatibility must also be checked.

Siemens has announced this part for phase-out effective January 31, 2026. The SIMATIC HMI Unified Comfort Panel 6AV2128-3GB06-0AX1 is identified as a recommended successor. Before selecting an alternative, check project compatibility, the physical cutout and the installation dimensions.

Frequently Asked Questions

Which software is required to configure the Siemens TP700 Comfort 6AV2124-0GC01-0AX0?

The panel is configurable with SIMATIC WinCC Comfort V11 or higher in TIA Portal.

How can a project be transferred to a replacement TP700 Comfort panel?

The project can be restored from a System SD Card or downloaded from an engineering PC through TIA Portal and WinCC Comfort.

Which communication interfaces does the TP700 Comfort provide?

It has two RJ45 ports for a two-port PROFINET Industrial Ethernet switch and a combined RS-485/RS-422 interface with a 9-pin Sub-D connector for MPI and PROFIBUS-DP. It also provides two USB 2.0 Type-A ports and two SD card slots.

How can the TP700 Comfort be diagnosed?

Use TIA Portal, SIMATIC WinCC Online Diagnostics, system diagnostic screens on the panel or the built-in web server through HTTPS.

What should be checked before replacing the 6AV2124-0GC01-0AX0?

Check the exact part number, communication architecture, project, firmware, hardware generation, physical cutout and installation dimensions. The recommended successor family is the SIMATIC HMI Unified Comfort Panel, part number 6AV2128-3GB06-0AX1.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.