Siemens 6AV6643-0ED01-2AX0 SIMATIC MP 277 HMI Panel

New 
On request
Refurbished   
2 available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: SIMATIC HMI | Series: MP 277

The Siemens 6AV6643-0ED01-2AX0 is a SIMATIC MP 277 10 Touch HMI operator panel with a stainless steel front for machine operation, process visualization and operator control. It uses a 10.4-inch TFT touchscreen with 640 x 480 pixel resolution and 65,536 display colors. The front is made from stainless steel 1.4301 with a 240-grit finish and continuous decorative film, and provides IP66K protection for demanding hygienic installations.

A replacement panel can be connected through the integrated RJ45 interface for Industrial Ethernet and PROFINET, the 9-pin Sub-D RS485 interface for PROFIBUS, MPI and serial communication, or the integrated RS422 interface. Two USB Type A host ports support data transfer and service tasks, while the MMC card slot supports removable project storage. The 128 MB retentive Flash memory can be used with MMC/SD backup and restoration or WinCC flexible project transfer, so commissioning normally requires the correct project, communication settings and WinCC flexible runtime alignment.

For maintenance, the MP 277 provides on-screen diagnostic buffers, alarms, system diagnostic screens and Control Panel access. WinCC flexible online diagnostics and web-based diagnostic access via HTTP can support troubleshooting and status checks. Before installing a spare, verify the panel cutout, enclosure dimensions, engineering compatibility, project transfer method and WinCC flexible runtime requirements. As a discontinued Siemens panel, it remains relevant for installed MP 277 systems where matching communication interfaces and project handling are important.

Technical Specifications

ManufacturerSiemens
Part number6AV6643-0ED01-2AX0
Model/typeSIMATIC MP 277 10 Touch Stainless Steel Front
Component typeHMI operator panel
Product familySIMATIC HMI
SeriesMP 277
Display typeTFT
Display size10.4 in
Display resolution640 x 480 pixels
Display colors65536 colors
Backlight MTBF50000 h at 25 °C
Usable program memory128 MB
Retentive storageFlash memory with MMC/SD backup and restore support
Real-time clockHardware real-time clock with battery backup
Front materialStainless steel 1.4301 with 240-grit finish and continuous decorative film
Front protection ratingIP66K
Ethernet interface1 x RJ45 for Industrial Ethernet and PROFINET
RS485 interface1 x 9-pin Sub-D for PROFIBUS, MPI and serial communication
RS422 interface1 x integrated interface for serial communication
USB interfaces2 x USB Type A host interfaces
Memory card interface1 x MMC card slot, supporting cards up to 128 MB
Supported protocolsPROFINET IO, PROFIBUS, TCP/IP and Modbus TCP
Lifecycle statusDiscontinued

Programming and Configuration

The Siemens MP 277 10 Touch uses WinCC flexible for HMI project handling. A spare panel may require the original HMI project to be transferred or restored before it can operate as part of the machine installation.

Project backup and restoration can be handled through MMC/SD media or the panel's retentive Flash memory. The panel has 128 MB of usable program memory and an MMC card slot supporting cards up to 128 MB.

Commissioning should include alignment of the WinCC flexible runtime, project configuration and communication settings with the installed system. The Ethernet, PROFIBUS, MPI, serial and Modbus TCP connection requirements must match the existing machine configuration.

Communication and System Integration

The panel has one RJ45 Ethernet interface for Industrial Ethernet and PROFINET. Supported network communication includes PROFINET IO, TCP/IP and Modbus TCP, allowing the MP 277 to connect to compatible industrial automation networks.

A 9-pin Sub-D RS485 interface supports PROFIBUS, MPI and serial communication. An additional integrated RS422 interface is available for serial communication, providing connection options for legacy Siemens HMI installations and other configured systems.

Two USB Type A host interfaces support data transfer and service tasks. The MMC card slot supports removable project storage and backup or restoration workflows through MMC/SD media.

Diagnostics and Status Indication

Maintenance personnel can use WinCC flexible online diagnostics, the system diagnostic screen, the Control Panel, on-screen diagnostic buffers and alarms to assess the HMI and its project status.

Web-based diagnostic access via HTTP provides an additional method for checking the panel. For a replacement installation, verify the power-up project, network connection, communication configuration and project transfer before investigating faults in the connected machine system.

Replacement and Spare Part Considerations

The exact replacement reference is Siemens 6AV6643-0ED01-2AX0, model SIMATIC MP 277 10 Touch Stainless Steel Front. Matching the part number, stainless steel front, IP66K front protection, display format and available communication interfaces is important when replacing an installed panel.

Before fitting a spare, check the panel cutout, enclosure dimensions, engineering compatibility, project transfer method and WinCC flexible runtime requirements. The existing project and communication configuration may need to be restored through MMC/SD media, Flash memory or WinCC flexible.

Because this MP 277 panel is discontinued, repair or a tested exchange unit can be relevant for maintaining an existing installation. ABC Industrial Parts can support spare preparation, project transfer and repair or exchange assessment for installed Siemens HMI equipment.

Frequently Asked Questions

What is the Siemens 6AV6643-0ED01-2AX0?

It is a Siemens SIMATIC MP 277 10 Touch HMI operator panel with a 10.4-inch TFT touchscreen, stainless steel 1.4301 front and IP66K front protection.

Which communication interfaces does the MP 277 10 Touch provide?

The panel provides 1 x RJ45 for Industrial Ethernet and PROFINET, 1 x 9-pin Sub-D RS485 for PROFIBUS, MPI and serial communication, an integrated RS422 interface, and 2 x USB Type A host interfaces.

How is an HMI project transferred to a replacement panel?

Project backup and restoration can use MMC/SD media, the panel's 128 MB retentive Flash memory or WinCC flexible. The project, communication settings and WinCC flexible runtime must align with the installed system.

What diagnostic tools are available for this Siemens HMI?

Diagnostics can be performed with WinCC flexible online diagnostics, the system diagnostic screen, Control Panel access, on-screen diagnostic buffers, alarms and web-based diagnostic access via HTTP.

Is the 6AV6643-0ED01-2AX0 still in production?

The Siemens MP 277 10 Touch Stainless Steel Front is discontinued and is primarily relevant as a replacement, repair or installed-base spare for existing MP 277 systems.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.