Siemens 6SE7031-7HG84-1JA1 PSU1 Power Supply Card

New 
4 available within 2 - 3 business days
Refurbished   
8 available within 4 - 6 business days
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

Product Family: SIMOVERT MASTERDRIVES

The Siemens 6SE7031-7HG84-1JA1 is a PSU1 internal power supply card for SIMOVERT MASTERDRIVES frequency inverters and converters. It provides internal control logic power and auxiliary voltages within compatible drive units. The card is associated with SIMOVERT MASTERDRIVES Designs E through H and is used as a service and replacement part in legacy Siemens drive systems.

Before commissioning a replacement PSU1 card, match the exact part number with the installed drive and check the drive configuration, design, and electrical ratings. The card supports 380-460 V AC or 660-690 V AC three-phase input, with corresponding DC link voltage ranges of 510-620 V DC or 890-930 V DC at 50/60 Hz. Confirming these values against the drive nameplate and installed configuration helps prevent an incorrect replacement from being fitted.

For a replacement or repair, first verify that the failed card belongs to a compatible SIMOVERT MASTERDRIVES unit using Designs E through H and that the applicable AC input and DC link voltage ranges match. This discontinued Siemens PSU1 card is relevant to servicing legacy inverter and converter cabinets where preserving the original drive architecture is required. When the internal power supply card is faulty, a tested replacement or repair can support a faster return to service than substituting an unverified variant.

Technical Specifications

ManufacturerSiemens
Part number6SE7031-7HG84-1JA1
Model/typePSU1 Power Supply Card
Component typePower supply card
Product familySIMOVERT MASTERDRIVES
Compatible designsSIMOVERT MASTERDRIVES Designs E through H
AC input voltage range 1380-460 V AC, 3-phase
AC input voltage range 2660-690 V AC, 3-phase
DC link voltage range 1510-620 V DC
DC link voltage range 2890-930 V DC
Input frequency50/60 Hz
Lifecycle statusDiscontinued

Replacement and Spare Part Considerations

Use the complete Siemens part number 6SE7031-7HG84-1JA1 when identifying a spare PSU1 card. Compatibility depends on the installed SIMOVERT MASTERDRIVES unit, Designs E through H, the drive configuration, and the applicable three-phase AC input and DC link voltage range. A visually similar card should not be treated as an equivalent without matching these identifiers.

The card is intended for replacement of an internal PSU1 assembly, servicing legacy SIMOVERT MASTERDRIVES frequency inverters and converters, and refurbishing compatible drive cabinets. Check the drive nameplate and installed configuration before fitting the spare so that the 380-460 V AC or 660-690 V AC input range and the corresponding 510-620 V DC or 890-930 V DC link range are appropriate for the unit.

Frequently Asked Questions

What is the Siemens 6SE7031-7HG84-1JA1?

It is a PSU1 internal power supply card for Siemens SIMOVERT MASTERDRIVES frequency inverters and converters. It provides internal control logic power and auxiliary voltages.

Which SIMOVERT MASTERDRIVES units are associated with this PSU1 card?

The 6SE7031-7HG84-1JA1 is associated with SIMOVERT MASTERDRIVES Designs E through H. The installed drive design and configuration should be matched before ordering a replacement.

Which input voltage ranges does the 6SE7031-7HG84-1JA1 support?

The card supports 380-460 V AC or 660-690 V AC three-phase input at 50/60 Hz. The corresponding DC link voltage ranges are 510-620 V DC and 890-930 V DC.

What should be checked before installing a replacement PSU1 card?

Check the complete part number, the SIMOVERT MASTERDRIVES design, the drive configuration, and the applicable AC input and DC link voltage ranges against the installed unit.

Is the Siemens 6SE7031-7HG84-1JA1 suitable for legacy drive repair?

Yes. It is intended for maintenance, repair, and refurbishment of compatible legacy SIMOVERT MASTERDRIVES frequency inverters, converters, and drive cabinets.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Siemens.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.