Ametek PCI-5565PIORC Ultra-High-Speed Fiber-Optic Reflective Memory PCI Card

New 
On request
Refurbished   
On request
Want to exchange a faulty product?
Receive a discount on your purchase when you turn in a faulty product. Upon receipt, we will check the product to determine its eligibility according to the terms and conditions.
Repair  
Available
We can repair this product for you.
 

Product Information

The Ametek PCI-5565PIORC, also identified with Abaco Systems, is an ultra-high-speed fiber-optic Reflective Memory PCI card for deterministic real-time data sharing between industrial computers, controllers and test platforms. It operates on the RFM-5565 Reflective Memory network at 2.12 GBaud and uses automatic write-broadcast transfers to share data without host processor involvement. The card provides an LC fiber-optic connector and supports multimode or singlemode fiber, making it suitable for distributed control, synchronized data acquisition, hardware-in-the-loop simulation and real-time test systems.

A replacement must match the host PCI requirements and the existing RFM-5565 network. The universal PCI interface supports 32-bit or 64-bit operation at 33 MHz or 66 MHz, with 3.3 V or 5.0 V signaling at 33 MHz and 3.3 V signaling at 66 MHz. Network transfer rates range from 43 to 170 MB/s depending on packet size, with packet sizes from 4 to 64 bytes, and the network supports up to 256 nodes. Before commissioning a spare, check the installed fiber type and distance, onboard SDRAM configuration, host operating system, and RFM2g driver environment. RFM2g supports Linux, VxWorks and Windows, and a system replacement may require driver installation and configuration work rather than a simple plug-and-run exchange.

For troubleshooting, use the RFM2g driver diagnostic utilities together with the card's redundant transfer error detection and network-wide interrupt capabilities. Check the PCI host compatibility, LC fiber connections, fiber type and network configuration before replacing the card. The PCI-5565PIORC is discontinued, with an end-of-life date of February 21, 2023. For an upgrade, the PMC-5565PIORC mounted on an Abaco 2BARCBD1 PMC-to-PCI carrier provides the stated replacement path; verify memory configuration, operating-system support, cabling and host PCI requirements before substitution. ABC Industrial Parts can assist with repair or exchange preparation when a failed card must be matched to the existing Reflective Memory network.

Technical Specifications

ManufacturerAmetek
Part numberPCI-5565PIORC
Model/typeUltra-high-speed fiber-optic Reflective Memory PCI card
Component typeReflective Memory communication card
Product family5565 Reflective Memory Family
Communication protocolRFM-5565 Reflective Memory
Reflective Memory network data rate2.12 GBaud
Network transfer rate43 to 170 MB/s
PCI bus transfer rateUp to 528 MB/s
Maximum network nodes256
Onboard SDRAM capacity128 or 256 MB
DMA channels1 independent channel
Packet size4 to 64 bytes
Fiber-optic network connectorLC
Fiber compatibilityMultimode and singlemode fiber
Multimode fiber distanceUp to 300 m
Singlemode fiber distanceUp to 10 km
PCI host bus interfaceUniversal PCI, 32-bit or 64-bit, 33 MHz or 66 MHz
PCI signaling3.3 V or 5.0 V at 33 MHz; 3.3 V at 66 MHz
Data transfer methodAutomatic write-broadcast without host processor involvement
Lifecycle statusDiscontinued; end-of-life date February 21, 2023

Programming and Configuration

The PCI-5565PIORC operates with RFM2g driver environments for Linux, VxWorks and Windows. The driver environment must match the host operating system and the installed Reflective Memory network configuration before the replacement card can be commissioned.

Configuration checks include the universal PCI host interface, RFM-5565 network parameters, node arrangement and installed fiber connection. The card provides one independent DMA channel and uses automatic write-broadcast transfers, allowing network data exchange without host processor involvement.

Communication and System Integration

The card communicates through the RFM-5565 Reflective Memory protocol at 2.12 GBaud. Its LC fiber-optic interface supports multimode fiber distances up to 300 m or singlemode fiber distances up to 10 km, subject to the installed fiber and transceiver configuration.

Network transfer rates range from 43 to 170 MB/s depending on packet size, with packets from 4 to 64 bytes. Up to 256 nodes can be connected in the Reflective Memory network, while the PCI interface supports 32-bit or 64-bit operation at 33 MHz or 66 MHz. PCI signaling is 3.3 V or 5.0 V at 33 MHz and 3.3 V at 66 MHz.

Diagnostics and Status Indication

RFM2g driver diagnostic utilities provide a method for checking the Reflective Memory communication card and its network operation. Redundant transfer error detection helps identify transfer problems, while network-wide interrupt generation supports coordination and event handling across distributed nodes.

For first-line troubleshooting, check PCI host compatibility, the LC fiber connections, the selected multimode or singlemode cabling, network node configuration and the RFM2g driver environment. A repair or tested exchange card may be more practical when the PCI card itself is suspected to have failed.

Replacement and Spare Part Considerations

The replacement must match the PCI-5565PIORC part number or the intended upgrade path, the host PCI signaling requirements, the RFM-5565 network and the installed fiber configuration. Verify whether the system uses multimode or singlemode fiber and whether the required link distance is within 300 m or 10 km respectively.

The PCI-5565PIORC is discontinued, with an end-of-life date of February 21, 2023. The PMC-5565PIORC mounted on an Abaco 2BARCBD1 PMC-to-PCI carrier is the stated replacement path. Check the onboard SDRAM requirement, operating-system support, RFM2g driver environment, cabling and host PCI compatibility before substituting the card.

Frequently Asked Questions

What is the Ametek PCI-5565PIORC used for?

The PCI-5565PIORC is a fiber-optic RFM-5565 Reflective Memory communication card for deterministic real-time data sharing between distributed computers, controllers and test systems.

What fiber connection does the PCI-5565PIORC use?

The card uses an LC fiber-optic connector and supports multimode fiber up to 300 m or singlemode fiber up to 10 km, subject to the installed fiber and transceiver configuration.

Which operating systems support the PCI-5565PIORC?

The RFM2g driver environment supports Linux, VxWorks and Windows. The driver environment must match the host system before commissioning a replacement card.

What must be checked before replacing a PCI-5565PIORC?

Check the host's 32-bit or 64-bit PCI operation, 33 MHz or 66 MHz bus requirements, PCI signaling, RFM-5565 network configuration, SDRAM requirement, fiber type, cabling and operating-system support.

Is there a replacement path for the discontinued PCI-5565PIORC?

The PMC-5565PIORC mounted on an Abaco 2BARCBD1 PMC-to-PCI carrier is the stated replacement path. Compatibility checks are required for memory configuration, host PCI requirements, cabling and software support.

How can communication problems be investigated?

Use the RFM2g driver diagnostic utilities and check the PCI host, LC fiber connections, fiber type, network configuration and driver environment. Redundant transfer error detection and network-wide interrupts provide additional diagnostic and coordination capabilities.

Take advantage of our exchange formula

A defective product does not have to be worthless. At ABC Industrial Parts, you can hand in defective products and immediately benefit from a discount on your new purchase. This is a smart way to save money while contributing to a circular economy.

Play it safe with our warranty conditions

Industrial plants prefer to keep running invariably, no matter what. Therefore, it is essential that you can rely on high-quality products and/or sustainable repairs. With our warranty conditions, you can count on certainty, whether you choose new, used or repaired products.​​​​​​​

Data backup and recovery

Have you lost valuable parameters or data due to a malfunction while the manufacturer no longer provides support? At ABC Industrial Parts, we help you secure this data, both for common and specific products.

Specific firmware and hardware versions

If you are working with specific hardware or firmware versions that are no longer available from the manufacturer, ABC Industrial Parts is your partner. When making your enquiry, clearly state which versions you need, we will then look at the possibilities of supplying those versions, so that your installations continue to function optimally.


Disclaimer:
We are not an authorised distributor of Ametek.
Product photos are for illustration purposes only and may differ from the actual product delivered.
Some of the content on this page was created with the help of AI. While we strive to provide accurate and up-to-date information, errors may occur.